中文
English

How to choose the model of filtering equipment for swimming pool

2022-11-29

There are several common models among the filtering equipment of swimming pool water treatment equipment. In these different swimming pool water treatment filtering equipment models, in fact, each adaptive occasion is different. It is not said which of these equipment is completely good, or which equipment is completely obsolete. It mainly depends on whether the environment you use is more compatible with this model. Let's briefly talk about how to choose the filter equipment model in the swimming pool water treatment equipment.


1. Look at the water cycle


The water circulation cycle has different requirements for each different type of swimming pool. For example, there are large, small, and private swimming pools of different types. It has different requirements for the amount of use, so the water cycle cycle is also different. In order to meet the national safety requirements, the water cycle must meet certain standards. If your swimming pool is too large, its cycle period may be short and the volume is relatively large. In this case, the model of the filtering equipment in the swimming pool equipment must be considered to fully consider whether the water filtering capacity during use meets the requirements.



2. Look at the water treatment volume per hour


The amount of water processed per hour is actually inseparable from the use environment. It is not to say that the greater the usage, the greater the water treatment capacity per hour. The water treatment volume per hour is mainly based on the size of the swimming pool, the number of users, and the frequency of use. Comprehensive consideration, the water flow that needs to be processed every hour, to choose the corresponding filtration equipment, this is the most sensible.


3. Look at the filter model


The general filter model is divided into the front suction system of the water pump and the rear suction system of the water pump. If it is a pump front suction system, its setting needs to be less than 1.2 meters below the level of the ground, and if it is a pump rear suction system, naturally, its construction needs to be below the ground level 4.5 meters.


There are many kinds of filtering equipment in swimming pool water treatment equipment, but each type of equipment is used differently, and the type of filtering equipment that needs to be used is also different. This is not a completely unified concept, so specific analysis needs to be carried out according to the specific conditions of actual use.

share